What is netgear switch mac address prefix

What is netgear switch mac address prefix how to#
What is netgear switch mac address prefix password#

The format for the destination MAC mask is xx:xx:xx:xx:xx:xx. Specify the destination MAC address mask that determines which bits in the destination MAC the smart switch must compare against an Ethernet frame. If you use the Spanning Tree Protocol (STP) with Bridge Protocol Data Units (BPDUs), you can specify a destination MAC address in the format 01:80:C2:xx:xx:xx. The format for the destination MAC address is xx:xx:xx:xx:xx:xx. Specify the destination MAC address that the smart switch must compare against an Ethernet frame. Specify whether all packets must match the rule: Packets that meet the rule criteria are dropped. Packets that meet the rule criteria are forwarded. Select the action that the smart switch must take if a packet matches the rule criteria: Enter a number in the range from to 10.Р’В This number identifies the rule. In the table, specify the following settings:.

Creates an ACL based on the source IPv6 layer4 port number. Creates an ACL based on the destination IPv6 layer4 port number.

ACL Based on Destination IPv6 L4 Port.

Creates an ACL based on the source IPv4 layer4 port number. Creates an ACL based on the destination IPv4 layer4 port number.

ACL Based on Destination IPv4 L4 Port.

Creates an ACL based on the source IPv6 prefix and IPv6 prefix length. Creates an ACL based on the destination IPv6 prefix and IPv6 prefix length. Creates an ACL based on the source IPv4 address and IPv4 address mask. Creates an ACL based on the destination IPv4 address and IPv4 address mask. Creates an ACL based on the source MAC address, source MAC mask, and VLAN. Creates an ACL based on the destination MAC address, destination MAC mask, and VLAN.

From the ACL Type menu, select one of the following ACL types:.

Passwords are case-sensitive.Р”Р„fter the system authenticates you, the System Information screen displays.

What is netgear switch mac address prefix password#

Type the password in the Password field.

In the browser address field, type the IP address of the smart switch.

To use the ACL Wizard to create an ACL that is based on a destination MAC address and apply it to selected ports: The ACL Wizard on your smart switch might provide a different configuration order and other configuration options. However, not all smart switches have the same type of ACL Wizard.

What is netgear switch mac address prefix how to#

The following procedure provides one example of how to create and apply an ACL by using the ACL Wizard. If you want one particular switch to be the Root Bridge (Switch), change the priority to a lower value than 32,768.For information about the ACL Wizard, see the РІР‚Сљ What is the ACL Wizard on a smart switch Here Switch 1 is the Root Bridge (Switch) since it has the lowest MAC address. The following example shows four switches with default priority value. If all the Switches in your Local Area Network (LAN) are configured with the default Switch Priority (32,768), the Switch MAC address will become the decisive factor in electing the Root Bridge (Switch).The Bridge (Switch) with the lowest MAC Adress is then elected as Root Bridge (Switch). The Switch Priority, which is a numerical value defined by IEEE 802.1D, which is equal to 32,768 by default.The Bridge (Switch) priority value is used to find the Bridge (Swtich) ID. The branches (Ethernet connections) are then branched out from the root switch, connecting to other switches in the Local Area Network (LAN).Р”Р„ll Bridges (Switches) are assigned a numerical value called bridge priority. The Root bridge (switch) is a special bridge at the top of the Spanning Tree (inverted tree).